H A N D L E B A R S Y S T E M
S H O T D O C K S Y S T E M
ACCESSORIES
H O O K S U P P O R T S
The Support Hooks have been developed to fit our Handlebars and our Extension Handlebars and can be easily retrofitted to any dual support rigs like the Walter Klassen Slingshot or Ready Rig. The unique profile facilitates easier handling of the hooks while under tension.
M O V I S P I G O T
This is the same MoVI Spigot that we have mounted to our Handlebars and on our Roll Over Rig. The use of our spigots negate the need to use additional intermediary adapter plates, allowing you to mount the spigot anywhere. We have the built-in functionality of a M10 1.5mm tapped hole in the center which allows you to mount the MoVI spigot directly to most 3rd Party accessories such as a Doughty Tube Clamp. There are also 6 additional through holes and 6 additional tapped holes (positioned in opposing faces) that have been included in the design to accommodate standard M3 bolts.
​
The included removable stainless steel double sided bolt has an M10 1.5mm thread on the spigot side and a 3/8 UNC thread on free side, allowing you to mount the spigot into any standard filming mounts.
M O V I C U B E
The MoVi Cube is one of the components we include with the Roll Over Rig. We have included this in the accessories list as an item you may wish to purchase separately as it allows for some very minimalist rigging options when combined with our MoVi Spigot, Top Handle or Rigging Handle. Giving you the option to operate, with a Top Handle only with minimal weight and a very small profile. In addition, we have also included a 3/8 UNC mounting point on the MoVi Cube for other rigging options.
S P I G O T A D A P T E R S
Incorporated on both the left and right handle blocks of the Handlebars and on the ends of both the Top Handle and Rigging Handle are locations to accommodate a standard 19mm style lighting spigot.
​
We have developed our own range of spigots with 3/8 male and 3/8 female threads to allow you to fit them to your camera accessories should you wish to have a lighter, sleeker and more refined overall look to you Handlebar setup.
M o V i P R O R I N G T O P H A N D L E A D A P T E R
An adapter for the MoVI Pro Ring has been developed to allow the integration of our Top Handle and Rigging Handle. The adapter allows for the Handles to be easily removed for easy storage and interchangeability for various operating modes.
D J I R O N I N 2 R I N G T O P H A N D L E A D A P T E R
An adapter has also been developed for the Ronin 2 Ring to allow the integration of our Top Handle and Rigging Handle. The adapter allows for the Handles to be easily removed for easy storage and interchangeability for various operating modes.
H A N D L E B A R E X T E N S I O N S
100mm, 200mm and 300mm Extension Handles are available to suit your needs. The handles are machined from 30mm diameter aluminium bar with a course diamond knurling to allow for effective handling.
​
Also incorporated into the handles are removable engineering plastic end guards to cater for various rigging setups. These are provided to improve handling of the extensions and to provide a more resilient material to protect against any drops the Handlebar Extensions might sustain whilst in use.
​
These are typically sold in pairs with our extension handle setups but we are also offering them as individual handles for those just wishing to purchase handle options for a rigging handle ONLY setup as shown in the image below.
S W I V E L L I F T I N G E Y E
We have a 2-axis/ double articulating eye that has a SWL of 600kg and is supplied with a CE certificate. The eye is larger than most and big enough to accommodate the largest of fixtures. The ability to swivel and tilt means that the eye is free to move "independently" and allowing perfect alignment with the rope/ sling support setup should the gimbal rotate during the lift. This eye can be used up to 90 degrees from vertical in any direction.
This eye may improve instances by reducing the effects a suspended support system might have on the movement or operation of the gimbal, but its primary purpose is as a better and safer alternative to standard screw eyes in unusual circumstances.
The male thread on the underside is an M10 1,5mm thread which can be used on both our Rigging handle and the Rigging Cubes of the Extension Handles. Tightening of the eye is done by hex key or a spanner.
​
Standard screw eyes are meant only for axial loads, or load bearing or lateral loads at a maximum of 45° from the thread. They are not to be used under shear tension or loads (across the thread), nor for loads likely to swivel. Applied forces must act in the direction of the eye bolt plane and should not apply forces across the eye bolt plane.
